Free Shipping on All Orders & Free Embroidered Cap for the First 500 Orders
How to Get Rid of the Mold on Drywall in Your Home

What to do About Mold on Drywall Surfaces

As a homeowner, mold is one of those nuisances you most likely will experience. It typically festers in rooms prone to humidity, such as bathrooms, basements, laundry units, and kitchens. Damp air, high temperatures, and little ventilation brew the perfect environment for mold. Be on the lookout for growing spores on your walls near the ceiling or along the floors.

Don’t be frightened just yet! Mold is actually quite common and can be removed quickly and easily if you follow these steps. Here are our best tips on what to do if you spot mold on drywall.

The first step is identifying if you have painted or unpainted drywall. Indoor rooms are most likely to be coated, however basements or garages may have unfinished drywall.

How to Remove Mold from Painted Drywall

Step 1: Choose a cleaning agent

There are a few traditional household items you could use to eradicate mold. Depending on the severity of the outbreak, give these solutions a try.

  • Baking Soda—Use one-part baking soda and five-parts water. This mixture is the mildest solution, but the safest.
  • Vinegar—Mix vinegar with equal parts water for a more potent cleanser. It is safe to use around children and pets, too!
  • Detergents—Laundry or dish detergent can be used as-is. They are also safe around children and pets.
  • Bleach—Mixing one-part bleach and three-parts water will give a potent solution that should only be used on the most unfavorable mold.

Once you have determined which solution will be best, pour it into a spray bottle. Give the bottle a good shake to ensure a proper mix!

Step 2: Follow proper safety precautions

Accidents happen. Protect your room by setting up a drop cloth and moving out any furniture in harm’s way. If you are working with a more potent chemical, such as bleach, be sure to open some windows or use a fan to create ventilation. Wearing a mask and gloves is always recommended.

Step 3: Removing the mold

Spray your solution directly on the mold, just enough to cover the area without oversaturating it. Using a soft bristle brush, scrub the area. A toothbrush or the abrasive side of a sponge are good alternatives. Once the mold is cleaned away, pat dry, as leaving behind a damp wall can invite more mold.

How to Remove Mold from Unfinished Drywall

Step 1: Be prepared for a project

Unfortunately, getting rid of mold on unfinished drywall can be tricky. As there is no protective coating present, mold can penetrate deeper and ruin the material. However, you can still fix this problem yourself! Replacing drywall may seem like a challenge but can be a breeze if you follow along.

Step 2: Secure and protect the area

As your room will become a mini construction site, you must protect valuable items by removing them from the space. Then, lay down a floor covering. With any construction project, be sure to wear a mask and gloves.

Step 3: Replace the drywall

Using a pencil, draw a square around the area infected with mold. Then, using a jab saw, follow your lines and cut out the compromised drywall. Avoid electrical wires, water pipes, or other items that you may damage in the wall.

You can use drills, screws, and wood slats to install the new piece of drywall. But why go through the extra trouble? Attach DryClip to the four corners of the hole in the wall. Then, secure the new piece of drywall onto the clips. It’s that simple!

Once the new drywall is in place, use a joint compound to cover the seams between the new and old pieces. Allow 24 hours for it to dry, then go over the area with sandpaper for a smoother appearance.

Use DryClip for an Easy DIY Drywall Repair

When you’re faced with mold on drywall and are looking at a repair, there’s only one tool that will simplify it. DryClip eliminates the need for power tools and can install drywall in minutes. It adjusts to fit any thickness of drywall too! Shop now!

Please note, when mold has spread throughout a room or house, many states require a mold mediator inspector to inspect the residency. The extent of damage and the proper procedure to remove and eradicate the mold must be determined. At that point, a mold mediator certified contractor will take over the cleaning and removal of the mold. The homeowner should contact their insurance and take the proper steps to generate a claim. When dealing with an infested mold incident always follow your local county, state, and federal regulations.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Compare
Wishlist 0
Open wishlist page Continue shopping